Why choose Casting Epoxy:
- Very low mixed viscosity for best-in-class air release in deep pours and large volume projects
- Thick layer friendly (1–2"): formulated for controlled slow heat generation in thick layers
- Colourimetry certification of raw materials ensures consistent optical clarity. We never use technical-grade raw materials with a yellow hue
- Tough when cured: forms a dense, durable network (think more molecular connections compared to similar products).
- Your project is shielded from rapid yellowing in sunlight through a two-stage synergistic UV protection.
Our Casting Epoxy is made responsibly with bio-based content from recycled glycerol. This system has three key differences from other similar products on the market:
| Mixing Ratio | 2:1 by volume |
| 2.33:1 by weight | |
| Appearance (mixed) | clear, low-viscosity liquid |
| Intended application | castings 1"-2" thick |
| Working temperature | 20-25°C |
| Mixed Viscosity | 215-250 cP. |
| Working Time (1.5" thick 10L pour) | 60 min. |
| Pot Life (1.5" thick 10L pour) | 5 h. |
| Set To Touch (1.5" thick 10L pour) | 20 h. |
| Ready For Sanding |
24-72 h. (depending on the ambient conditions and thickness of the epoxy layer) |
| Hardness | 80+ Shore D |
| Bio-Content (resin) | ≥28% |
Our epoxy is made responsibly
Nerpa Polymers uses a complex approach to manufacturing our resins. Our company employs sustainable methods for producing our resins, such as a zero chemical waste policy with solvent-free resin manufacturing and equipment maintenance. Our Casting Epoxy is made responsibly using a by-product of bio-diesel production – plant-based glycerol. Casting Resin contains 28% of annually renewable carbon. Learn more.
Extremely low viscosity
The result of our R&D work is one of the best-flowing epoxies on the market. The low viscosity of only 215-250cP is achieved without using solvents and additives compromising the cured properties of the material. Worry less about bubbles in your project!
UV protection
We stabilize our epoxy resin with a two-step complementary UV protection sequence. This concept is based on preventing initial damage to cured resin by the absorbance of the UV light with UV-absorbing molecules that trap the light of 360-400nm, followed by the second step of neutralizing unwanted radicals capable of damaging the molecular network. Read more about our approach to UV protection in our blog.
Attention customers from the USA: this product qualifies as an originating good under USMCA - no U.S. customs duty expected. Please refer to our shipping policy.
